Tag: Quality Control

Poka-Yoke in Manufacturing: 12 Types and The 3 Errors It Can’t Catch

Poka-Yoke in Manufacturing: 12 Types and The 3 Errors It Can’t Catch

While traditional poka-yoke fixtures excel at catching physical assembly errors, tracing the invisible skipped steps and sequence mistakes that cause field failures requires a completely different approach to mistake-proofing...

Read more
SOP vs Work Instructions: The Difference, and Why Neither Proves the Step Happened

SOP vs Work Instructions: The Difference, and Why Neither Proves the Step Happened

SOP vs work instructions: a side-by-side table, if/then rules for when you need both, and why neither document records that the step happened.

Read more
First Pass Yield: The Formula Is Easy, the Data Is the Hard Part

First Pass Yield: The Formula Is Easy, the Data Is the Hard Part

First pass yield measures the units that pass flawlessly on the first try, but relying on a single line-level score often hides exactly which assembly stations are causing your rework...

Read more
Visual Inspection in Manufacturing: Methods, Limits, and What the Camera Still Misses

Visual Inspection in Manufacturing: Methods, Limits, and What the Camera Still Misses

Every visual inspection method watches the part. None of them watch the work that made it. An inspector at 220 units an hour has under two seconds per checkpoint, and Sandia's study found trained inspectors

Read more
Automated Visual Inspection: Machine Vision vs AI Vision, and Which One Your Line Needs

Automated Visual Inspection: Machine Vision vs AI Vision, and Which One Your Line Needs

AI-powered automated visual inspection" on a quote sheet can mean one of three very different technologies: rule-based, learned, or action-based. This article breaks down…

Read more